Diedrich IR-5 Analysis by Chris Kornman
Sometimes you throw caution to the wind, kick your burners up, and ride a profile like a bat out of hell. These Kenyas love it when the metal is hot and the engine is hungry. Mahiga has become synonymous with delicious around here over the past few years, and just like in years past, you can really crank the gas on this oversized AB.
My initial Diedrich roast of this coffee used a hot charge from idle. Doris had already roasted a few batches so the bean temp read about 430F and the exhaust was stable at 410F. Using an initial 70% burner setting, I did a quick airflow toggle from 50% (idle) to closed at the turning point, then back to 50% about 30 seconds before color change was visible. I also ramped up the gas briefly to 85% just before Maillard to give the coffee a last little push out of drying stage, and I opened the airflow fully through the roasting drum.
With rate of rise steady at 40F/minute a minute past color change, I dropped my burner to 30%, bringing the roast gradually to about 20F/minute as the first couple of audible cracks started around 6:45, pretty hot and quick compared to my usual profiles. I marked the start of rolling first crack at 7:06, shut off my burners, and baffled the airflow back slightly to try and find a middle ground of heat retention in the drum.
I checked the color a few times and dropped the batch at 1:17 of development at a very low 390F end temperature. The roasted weight loss was just a fraction above the total moisture content, at 11%. The coffee Colortracked at 53, which is light but not too light.
What an absolute delight on the cupping table. Cranberry, plum, and yuzu made multiple appearances from our cupping team, and we lauded its complexity and bright but not overwhelming acidity. When the day is done and the sun goes down and the moonlight’s shining through I’ll come crawling back to this delicious Mahiga.